Hardwood Floor Cleaning in Los Angeles: Is It Time to Refinish Your Floor? (Contd.)

There is a lot more to hardwood floor refinishing than you might think.

Get Professional Hardwood Floor Restoration Done | (310) 545-8750

Hardwood Floor Refiniishing: Applying a Sealer

As we covered previously, a base coat sealer should be used before the polyurethane finish to avoid discoloration. Your base coat will take about three hours to dry if you pick water-based polyurethane, and closer to eight hours if you decide to use oil-based polyurethane. You'll need to work more quickly to avoid unsightly lap marks with water-based polyurethane, but the overall restoration will take less time.

Since oil-based polyurethane takes longer to dry, it's much more forgiving when it comes to correcting mistakes; for this reason oil-based polyurethane is sometimes recommended for first-timers.An oil-based polyurethane will turn an amber color as it ages, whereas a water-based polyurethane will stay clear and preserve the original color of your hardwood floor. Water-based polyurethane also produces fewer noxious fumes than oil-based polyurethane. Although neither finisher is a poor choice, consider your experience and time constraints before making your selection for your  hardwood floor refinishing project.

Once your base coat is dry, apply two more coats of finisher, adhering to the above-mentioned drying times. Once your first coat of finisher is dry you have the option to re-sand and re-vacuum for the smoothest possible finish, but don't sand your final coat. Professionals recommend refinishing your floor every two years or whenever it starts to look worn.

Why a Hardwood Floor Refinishing Service May be a Better Choice

A hardwood floor refinishing service may be a better answer as they have all of the equipment, the chemicals, and most importantly of all, the experience.  How important is experience in hardwood floor refinishing?  Well, first off, do you know what brand of sealer to apply?  How about where to get it?  What will you do if something goes wrong?  A professional service wouldn't even balk at such a project.  They'd get started immediately and guarantee their work.  This is crucial for one reason.  Have you priced a new hardwood floor lately?  Here's a spoiler.  They are kind of expensive.  Oh you could go cheap, and go for laminate or some other floor choice, but an honest to goodness hardwood floor will set you back several thousand dollars.

In addition, not only will their experience help you, it will help you to relax and not do hours of backbreaking work.  So remember, the key is how to use your money.  It's better to use your money
to hire a hardwood floor cleaning service instead.
Morris Cleaning & Restoration
1007 N.Sepulveda Blvd. #1204
Manhattan Beach, CA 90267
(310) 545-8750
Contact Us

Hardwood Floor Cleaning in Los Angeles: Is It Time to Refinish Your Floor?

Calling a hardwood floor cleaning service in Manhattan Beach may provide you with some more services other than just cleaning.

Call Today for Hardwood Floor Cleaning in the South Bay of Los Angeles | (310) 545-8750

Hardwood Floor Cleaning and Refinishing

One benefit that a hardwood cleaning service can offer you is hardwood floor refinishing.

Want to dress up your hardwood floors and increase the value of your home? Sanding and refinishing a hardwood floor without hiring a professional is an affordable option, that often costs between $125 -$250 for a 15-by-15ft room. That expense covers the cost of sandpaper, a drum sander, an orbital sander, and a polyurethane finish.

First sand the floor down to bare wood, using a drum sander. Sanders can be rented from most home improvement stores, like Lowe's or Home Depot. Most floors need to be sanded several times in order to remove the old finish. We recommend using progressively smaller sandpaper grits, starting with 36 grit, before moving to 60 grit, and finally 80 grit.

More Hardwood Floor Refinishing Tips

You'll want to start with the drum sander, then go over the hard-to-reach places like corners and edges with a smaller, orbital sander. It's also a good idea to vacuum between each sanding to get rid of the dust. After vacuuming, dampen a cotton cloth with mineral spirits and wipe down the whole floor to make sure no lingering dust sticks to the new finish. Start in the area furthest away from the door to avoid getting trapped in a corner. You will only need to wait a few minutes for the mineral spirits to dry before proceeding with the base coat.  This is why a hardwood floor refinishing service may be a better idea.  There's a lot to know.

A base coat sealer should be used before the polyurethane finish to avoid discoloration. With a 4 inch paintbrush, line the perimeter of the room with a base coat sealer before covering the rest of the floor. Apply the sealer in the same direction as the wood grain from wall to wall for the most even results. Remember to work slowly to avoid creating bubbles, which will remain in your base coat and be visible though your finishing coats.You'll want to use long-handled synthetic finish applicator to smooth out your base coat before letting it dry. Wait about two hours before proceeding with the next step.
For your finish, you can choose either a water-based polyurethane, or an oil-based polyurethane.

Sounds like an awful lot of work.  You might want to call a hardwood floor refinishing service in Manhattan Beach instead.

MORE INFO

Morris Cleaning & Restoration
1007 N.Sepulveda Blvd. #1204
Manhattan Beach, CA 90267
(310) 545-8750
Contact Us